Accidentally wet-mopping laminate flooring can lead to potential issues if not addressed promptly. What are the best immediate drying and dehumidifying actions to take, and how can I inspect the edges to avoid issues like peaking or swelling?
6 Likes
Quickly wipe up water, run fans and a dehumidifier, and check plank edges for lifting or swelling to catch damage early.
Dry it immediately with fans or a dehumidifier. Avoid more water contact, and check seams for swelling—minor swelling might settle as it dries, but major bubbling will need board replacement.
If you’ve accidentally wet-mopped your laminate flooring, it’s essential to act quickly to minimize potential damage.
Immediate Actions; Stop the mopping, dry the Floor, Increase air circulation.
Dehumidifying Actions;
Use a dehumidifier, monitor humidity levels.
Quickly soak up standing water with towels, then run fans and a dehumidifier to pull moisture from seams. Focus airflow along plank edges and under baseboards if possible. Inspect for raised seams, soft spots, or edge lifting early signs of peaking or swelling. Keep the area dry for several days; if edges start to deform, repairs may be needed to stop further spread.
Laminate flooring and water don’t mix. If it gets wet, wipe up any water you see ASAP with a towel. Then, get some fans blowing on the floor seams and use a dehumidifier to dry things out. Check the board edges. If they’re raised or feel spongy, moisture’s getting in. Keep the area dry for a few days and watch it. Spotting trouble early can save you from replacing the whole floor.
Immediately remove standing water with a dry mop or towels, then use fans and a dehumidifier to dry the room thoroughly.
Inspect edges and seams for rising boards or gaps, gently lifting corners if possible, and keep the area ventilated for 24–48 hours to catch early signs of peaking or swelling before it worsens.
Dry the floor immediately with towels, run fans and a dehumidifier, and inspect seams for swelling or lifting to prevent long-term laminate damage.