Quick Guide: Installing Smart Light Switches

General
1

Step 1: Turn Off Power
Go to your circuit breaker and switch off the power to the light you’ll be working on. Safety first!

Step 2: Remove Old Switch
Unscrew the wall plate, then carefully disconnect the existing switch.

Step 3: Identify Wires
You’ll usually see line (power), load (to the light), neutral (often white), and ground (green or bare). Make sure you know which is which.

Step 4: Connect Smart Switch
Attach the wires to the smart switch according to the instructions—line to line, load to load, neutral to neutral, ground to ground.

Step 5: Secure and Mount
Push the wires neatly back into the box, screw the smart switch in place, and reattach the wall plate.

Step 6: Restore Power
Turn the breaker back on and test the switch.

Step 7: Set Up App
Download the manufacturer’s app, connect your switch to Wi-Fi, and finish setup.

:white_check_mark: Done: You now have smart lighting that can be controlled by app, schedule, or even voice assistants.

a0f40e13e6e0499972d94cafc2231494 (2)
a0f40e13e6e0499972d94cafc2231494 (2)726×683 61.6 KB

3 Likes
2

I’ll be able to do this myself

1 Like
3

Sure, you will be able to do thaat

4

Thanks for the instructions

5

Great instructions, thanks for that.

6

Thanks for your approval

7

Going through this made know that I can be able to fix myself

8

I should be able to try this myself with this guide

9

Thanks for the guide :smiling_face:

Can be able to do this now :grinning_face_with_smiling_eyes:

10

I will be able to this by myself

1 Like
11

Thanks for sharing , keep it up

1 Like
12

Glad to come across this

13

This is so interesting to read