Step by step guide on how to fix a 3D wallpaper

‎Here’s a clear step-by-step guide on how to fix (install) 3D wallpaper, plus the materials you’ll need. This works for most 3D wall murals, PVC 3D wallpapers, and embossed designs.

‎🧰 Materials & Tools Needed

‎3D wallpaper (measure your wall first)

‎Wallpaper adhesive (or pre-pasted glue if specified)

‎Clean bucket

‎Paint roller or wallpaper brush

‎Plastic smoothing tool / squeegee

‎Measuring tape

‎Pencil

‎Spirit level or plumb line

‎Utility knife / sharp cutter

‎Soft cloth or sponge

‎Step ladder

‎Sandpaper (fine grit)

‎Wall filler

‎Step by Step Installation Guide

‎Step 1: Prepare the Wall

‎Remove old wallpaper, nails, or peeling paint

‎Fill cracks or holes with wall putty

‎Sand the wall smooth

‎Clean off dust and grease

‎Make sure the wall is dry, smooth, and flat

‎note: A smooth wall is very important for 3D effects to look real.

‎Step 2: Measure and Plan

‎Measure wall height and width

‎Lay the wallpaper on the floor to understand the pattern

‎Mark a straight vertical line on the wall using a level (starting guide)

‎Step 3: Apply Adhesive

‎If the wallpaper is NOT self-adhesive:

‎Mix wallpaper glue as instructed

‎Apply glue evenly on the wall (or wallpaper back, depending on type)

‎Don’t over apply to avoid bubbles

‎If it’s self-adhesive:

‎Peel off backing slowly as you stick it to the wall

‎Step 4: Fix the Wallpaper

‎Start from the top of the wall

‎Align the first sheet with your straight guide line

‎Press gently from top to bottom

‎Use a squeegee or brush to smooth out air bubbles

‎Work from the center outward

‎Step 5: Match the 3D Pattern

‎Carefully align the next sheet so the 3D design matches perfectly

‎Press edges firmly so seams are invisible

‎Continue until the wall is covered

‎Step 6: Trim Excess Wallpaper

‎Use a sharp cutter to trim edges at the ceiling, floor, and corners

‎Wipe off excess glue immediately with a damp sponge

Step 7: Final Check & Drying

‎Smooth remaining bubbles

‎Let the wallpaper dry for 24 hours

‎Avoid touching or cleaning during this time

‎✅ Pro Tips for Perfect Results

‎Install in good lighting to align the 3D pattern correctly

‎Always use a sharp blade to avoid tearing

‎Don’t rush, 3D wallpaper needs careful alignment

‎For large murals, install with two people

Thanks this is very well detailed

1 Like

Excellent work keep it up bro

1 Like

Thank you for sharing this

1 Like

Thanks for the article, worth reading

1 Like

Really nice article thanks

1 Like

You are making sense bro

This is so impressive